Plants For Northern Emerald Tree Boas
In Emerald Tree Boa enclosures, plants are generally used in one of three ways, each serving a distinct function in the overall enclosure ecosystem.
Climbing and Trailing Plants provide vertical structure, cover, and visual complexity. They are ideal for arboreal species and help create the layered canopy environment that Corallus caninus naturally inhabits in the wild.
Understory and Ground Plants occupy the lower areas of the enclosure, supporting humidity, providing visual barriers at lower levels, and contributing to the substrate microhabitat and other creatures.
Epiphytes and Mosses mimic the epiphytic plant growth found throughout the Guiana Shield canopy, contributing to moisture retention and microfauna support while creating a naturalistic appearance at upper enclosure levels.
Throughout this page, entries marked as Guiana Shield natives are plants documented in the region where Corallus caninus occurs naturally, which includes Guyana, Suriname, and French Guiana. Entries without that note are popular vivarium plants that suit the enclosure environment but are not necessarily from the animal’s range.
Climbing and Trailing Plants
Emerald Tree Boas spend most of their time in vertical spaces, so vines and climbing plants are especially useful for creating navigable pathways and cover throughout the full enclosure height.
Golden Pothos (Epipremnum aureum): One of the most widely used and most reliable vivarium plants. Very hardy, tolerates a wide range of humidity and light levels, grows readily along branches and mesh, and provides excellent coverage quickly. A dependable choice for keepers at any experience level and one of the most commonly used plants in ETB collections.
Heartleaf Philodendron (Philodendron hederaceum): Guiana Shield native. This plant has dense foliage, slow to moderate growth, ideal for coverage from mid to upper levels. The large leaves provide meaningful visual cover and the plant tolerates the warm, humid conditions of an ETB enclosure well.
Swiss Cheese Vine (Monstera adansonii): Guiana Shield native. This plant is found in Guyana, Suriname, and French Guiana. Climbs along cork, branches, and background panels, and the perforated leaves give a distinctive look for your vivarium.
Shingle Plant (Monstera dubia): Guiana Shield native. Juvenile leaves lie flat against the surface the plant climbs, so it covers cork bark and background panels much as it covers tree trunks in the wild.
Regional Philodendrons (Philodendron pedatum, hylaeae, ornatum, and fragrantissimum): Guiana Shield natives. This plant can be found in Guyana, Suriname, and French Guiana. These are hemiepiphytic climbers that can get large in the wild. P. hylaeae can reach 15 m in trees, and P. fragrantissimum alternates clusters of leaves with very long bare stems, so give them room in larger enclosures or prune them regularly.
Other Philodendron species: Many philodendron varieties thrive in tropical vivarium conditions. Their large waxy leaves provide excellent cover and they are robust enough to handle contact from a large snake moving through the enclosure during nocturnal activity.
Cissus Vine (Cissus alata / Cissus amazonica): Tropical vine with a natural rainforest appearance. Can be trained along cork bark or branches and produces dense coverage relatively quickly in the warm, humid conditions of an ETB enclosure.
Hoya / Wax Plant (Hoya spp.): Trailing vine suitable for mounting or training along branches. Tolerates variable watering and contributes to humidity maintenance well.
Creeping Fig (Ficus pumila): A fast growing trailing species that covers surfaces well and is hardy in humid enclosure conditions. Useful for covering background panels or running along lower enclosure walls to create a denser visual environment.
Passionflower (Passiflora spp.): The genus is native to the Americas, with a few species in Asia and the Pacific. Compact or miniature passionflower vines can be trained up supports within the enclosure and suit the humidity and temperature range appropriate for this species. Passiflora tecta is a Guiana Shield native found in Guyana, Suriname, and Venezuela, for keepers building a strict regional setup.
Secure vines to perch structures and cork bark using plant clips or soft ties. Monitor growth to avoid shading basking spots too heavily or blocking perch access, and trim back aggressively growing species before they compromise the enclosure’s gradient structure.
Understory and Ground Plants
Lower layer plants support humidity, provide ground level visual cover, and contribute roots and organic surface area that support the cleanup crew population in bioactive setups.
Peperomia species: Compact, slow growing, and suited to substrate planting or small pots. Many species are native to tropical America and naturally adapted to the humidity levels appropriate for Corallus caninus. Peperomia quadrangularis, Peperomia rotundifolia, and Peperomia obtusifolia are Guiana Shield natives found in Guyana, Suriname, and French Guiana. P. rotundifolia trails, and P. quadrangularis grows as a small epiphyte or on rocks in the wild.
Ferns (Nephrolepis, Asplenium, and others): Classic rainforest appearance and excellent for shaded, humid areas at lower enclosure levels. Among the most humidity tolerant plant groups commonly available. Bird’s nest fern (Asplenium nidus) is particularly sturdy and handles the sustained high humidity and occasional contact of an ETB enclosure well.
Calathea (now Goeppertia) and Maranta (Prayer Plants): Broadleaf tropical plants that provide substantial visual cover at ground and lower to mid levels. The large, patterned leaves contribute meaningfully to the visual complexity of the lower enclosure zone, and the plants thrive in the indirect light and high humidity conditions appropriate for this species. Many plants sold as Calathea are now classified in the genus Goeppertia. Goeppertia majestica, formerly Calathea majestica, is native to Guyana.
Artillery Plant (Pilea microphylla): Guiana Shield native found in Guyana, Suriname, and French Guiana. Forms a dense mat of tiny leaves and works best at lower levels away from the animal’s main movement routes.
Alocasia and Colocasia species: Large leaved tropical plants that create substantial visual presence at lower and mid enclosure levels. Tolerant of the sustained humidity of an ETB enclosure and visually evocative of the dense broadleaf understory of the Guiana Shield rainforest.
Smaller Bromeliads: While bromeliads work well mounted at upper levels as epiphytes, smaller or terrestrial bromeliad species can be used effectively as understory plants at mid and lower levels, where the water held in their rosettes contributes to local humidity.
Place smaller plants near the substrate or lower perch positions. Avoid placing them directly beneath heat emitters where radiant output will rapidly dry their leaves.
Epiphytes and Mosses
Epiphytic plants and mosses replicate the natural canopy microhabitats of the Guiana Shield, stabilize humidity at upper enclosure levels, and provide the layered visual environment that contributes to animal security.
Bromeliads (Aechmea, Neoregelia, Tillandsia, Guzmania, and others): Mounted on wood or cork at upper enclosure levels. Water held in the leaf rosettes of tank bromeliads contributes to local humidity and creates microhabitat structure. Air plants (Tillandsia) require no substrate and can be attached directly to branches or cork, making them particularly versatile for upper enclosure positioning.
Scarlet Star (Guzmania lingulata): Guiana Shield native, very common in the Guianas and found in Guyana and Suriname. A spineless epiphytic bromeliad, which makes it a sensible choice where a heavy snake will rest against mounted plants.
Rosette Philodendrons (Philodendron linnaei and Philodendron melinonii): Guiana Shield native epiphytes that grow as rosettes of tightly packed leaves. P. linnaei is found in Guyana, Suriname, and French Guiana. Mature leaves can reach roughly 90 cm, so mount it where it will not crowd the perch.
Orchids (Dendrobium, Oncidium, and miniature epiphytic species): Small epiphytes suited for mounting high on branches or cork bark. Contribute canopy realism without taking up floor space and tolerate the humidity levels appropriate for ETB enclosures well.
Long Fiber Sphagnum Moss: Holds water for stable moist zones. Can be layered in specific areas to support humidity gradients or mixed into substrate blends. One of the most effective passive humidity tools available in a vivarium context.
Sheet or Cushion Moss: Moisture retention and microfauna habitat. Ideal for substrate edges, wood bases, and lower enclosure surfaces where the cleanup crew is most active.
Use moss sparingly near warm areas to avoid oversaturation. Mounted plants should be secured firmly to prevent displacement from a large snake navigating the enclosure overnight.
Plant Placement and the Enclosure Gradient
Where plants are placed within the enclosure is as important as which plants are chosen. Placement affects the thermal gradient, the UVI gradient from the lighting system, the humidity distribution, and the animal’s ability to move between perch positions with a sense of cover throughout.
Dense broadleaf plants placed at upper enclosure levels near the primary perch position create the dappled, filtered light environment that Corallus caninus occupies in the wild. As covered on the lighting page, this leaf scatter naturally attenuates UVI at the perch surface, contributing to the gradient that allows the animal to self regulate UV exposure by moving through different densities of vegetation rather than simply moving closer to or further from the lamp.
The warm end of the enclosure should not be so densely planted that the animal cannot access the primary perch or that airflow from ventilation is completely blocked at that zone. A balance between cover and access is the goal. The cool end can be more densely planted, as this is where the animal retreats when seeking lower temperatures and higher humidity, and dense vegetation supports both those conditions.
Trailing vines running between the warm end upper perch and the lower cool end perch positions create navigable pathways that allow the animal to move through the enclosure at height rather than descending to the floor. This connects directly to the perch placement guidance on the perches page and is particularly important for a species that should rarely need to contact the substrate at all.
Preparing Nursery Plants Before Use
Plants purchased from general nurseries, garden centers, or home improvement stores are almost universally treated with pesticides, systemic insecticides, fungicides, or fertilizers that are not appropriate for reptile enclosures. A plant that looks perfectly healthy and safe may be carrying residual chemical treatments that can cause harm when the animal contacts the leaves, rests on the plant, or drinks water that has run over treated foliage.
Before any plant is introduced to an ETB enclosure it should be prepared as follows. Remove the plant from its nursery pot and discard all nursery soil, which may contain fertilizers, wetting agents, or other additives. Rinse the root system thoroughly under running water. Repot the plant in clean substrate appropriate for the enclosure, with no added fertilizer. Allow the plant to grow in this clean substrate for a minimum of four to eight weeks before introducing it to the animal enclosure. This waiting period allows systemic pesticide residues to metabolize out of the plant tissue. During this period water only with clean water and do not add any fertilizer.
Plants purchased from specialist vivarium or reptile suppliers who grow specifically for the hobby are generally safer to introduce with a shorter preparation period, as they are typically grown without pesticide treatment. Plants collected from the wild should be thoroughly inspected, rinsed, and grown in quarantine conditions for several weeks before introduction to avoid bringing outdoor invertebrate pests or pathogens into the enclosure.
Plants to Avoid: Contact Risks for Snakes
Emerald Tree Boas are not herbivores and will not eat plant material. General pet toxicity information covering ingestion risks for dogs, cats, or small mammals is not directly applicable to this species and should not drive plant selection decisions for an ETB enclosure. The relevant question is whether a plant poses a contact risk to snake skin or mucous membranes, since the animal will rest on, move through, and press its ventral surface against enclosure plants during normal daily and nocturnal behavior.
The practical list of genuine contact concerns for snakes is short.
Euphorbia species are the primary group to avoid. Euphorbias produce a caustic milky white latex sap that is released when any part of the plant is cut, broken, or damaged. This sap is a potent irritant to skin and mucous membranes, and case reports in people document corneal injury from Euphorbia sap in the eye. Most of the evidence comes from human cases, so treat it as a precaution. An ETB moving through a euphorbia during nocturnal activity, or the animal’s weight breaking a stem, can release this sap directly onto the ventral scales. Euphorbias are common in general plant retail and should not be used in reptile enclosures regardless of how well they might suit the visual aesthetic. This applies even to species native to the animal’s range, such as Euphorbia prostrata, a small weedy spurge found in Guyana and Suriname.
Plants with dense surface irritant structures such as heavily spined, trichomed, or sticky surfaced species can cause mechanical irritation to delicate ventral scale surfaces under sustained contact. This is not a toxicity concern in the traditional sense but is a genuine welfare consideration for a species that rests its full body weight on plant surfaces for extended periods.
Plants with irritating sap are a third group worth knowing. Dieffenbachia and Tradescantia zebrina (wandering jew) are common houseplants that horticultural references list as causes of contact dermatitis in people. Dieffenbachia sap carries calcium oxalate crystals along with an enzyme that adds to the irritation. Calcium oxalate crystals are common across the aroid family, which includes pothos, philodendron, alocasia, and colocasia, but those are standard vivarium plants and intact leaves and stems are generally considered low risk. The practical precautions are to keep Dieffenbachia and Tradescantia zebrina out of the enclosure and to replace aroid stems that break under the animal’s weight.
Chemically treated nursery plants that have not been properly prepared are a contact risk regardless of species. As covered in the preparation section above, pesticide and fungicide residues on leaf surfaces can transfer to the ventral scales during contact. This applies to any plant from a general nursery regardless of its inherent safety profile, and is addressed through proper preparation rather than species avoidance.
Beyond these four categories, the vast majority of commonly used vivarium plants including pothos, philodendrons, bromeliads, ferns, peperomia, calatheas, orchids, alocasias, and mosses present little contact risk to snake skin when leaves and stems are intact, and are appropriate for use in ETB enclosures.
Artificial Plants
Artificial plants are a legitimate option for keepers who want the visual complexity and cover benefits of a planted enclosure without the maintenance requirements of live plants. They are particularly useful during quarantine periods when a minimalistic substrate is being used, for keepers who are not comfortable with plant care, or as supplementary cover in positions where live plants are difficult to establish.
Artificial plants should be made from materials that do not off-gas at the temperatures present in a warm, humid enclosure. Silk plants are generally safer than plastic in this regard. Artificial plants with wire frames can have exposed wire ends that cause abrasions if the animal moves through them at speed during nocturnal activity and should be checked for sharp points before use.
Artificial plants do not contribute to humidity through transpiration, do not support the cleanup crew population in a bioactive substrate setup, and do not interact with the substrate system in any way. They provide visual cover and complexity only. In a fully bioactive setup, artificial plants can complement live plants in positions where live plant establishment is difficult, such as near direct heat sources or in zones with high airflow where live plants struggle to retain moisture.
Plant Troubleshooting
Plants in a warm, humid, lower light enclosure environment face different stresses than the same species grown in typical household conditions. Knowing what common problems look like and how to address them prevents plant failure from disrupting the enclosure’s environmental stability.
Yellowing or dropping leaves. The most common cause in a well humidified enclosure is insufficient light rather than underwatering. If lighting is adequate, yellowing may indicate root rot from oversaturated substrate, nutrient depletion in substrate that has not been refreshed, or physical damage from the animal resting heavily on the plant over time.
Mold on leaves or stems. Fungal growth on plant surfaces indicates stagnant air around those surfaces. The solution is improved ventilation rather than reduced humidity. Remove visibly molded plant material promptly to prevent spread and ensure airflow reaches all areas of the enclosure including lower plant zones.
Plant is being damaged or flattened by the animal. ETBs are large snakes and broadleaf plants near primary perch positions will bear the animal’s weight during nocturnal movement. Select sturdier species such as pothos or philodendron for positions near primary perches and reserve more delicate species for lower levels away from the animal’s primary movement routes. Mounting plants to hardscape rather than relying on their stems also extends their lifespan under contact pressure.
Plants are not thriving despite appropriate conditions. If a plant is declining despite appropriate humidity, light, and substrate, check whether the root zone is being consumed by the cleanup crew. Large isopod populations will sometimes eat root material in newly planted setups. Adding more leaf litter to redirect the cleanup crew’s attention away from plant roots, and checking whether the substrate has compacted around the root zone restricting water movement and gas exchange, are the first troubleshooting steps.
A plant has died and needs to be removed. Dead plant material in a humid enclosure decomposes quickly and becomes a mold and bacterial source. Remove dead plants promptly, ideally during a routine cleaning session, and replace promptly to maintain the cover and humidity contribution the plant was providing.
Care and Maintenance
Substrate compatibility: Use a bioactive soil mix to anchor roots and support microbial communities. Avoid chemical fertilizers, which can harm the cleanup crew and potentially stress the animal through off-gassing or contact. Full guidance on substrate selection is on the substrate page.
Water and humidity: Maintain 70 to 90% relative humidity. Mist plants gently during regular misting cycles. Prevent localized waterlogging at the root zone by ensuring the drainage layer is functioning correctly.
Lighting: Provide indirect light suitable for tropical plants while keeping temperatures safe for the snake. Full spectrum LEDs in the 5,000 to 6,500K range as covered on the lighting page provide both the visible light spectrum the animal needs and the output that supports tropical plant photosynthesis.
Cleanup crew: Plants offer surfaces and roots for springtails and isopods, aiding waste decomposition and substrate health. A thriving plant system and a thriving cleanup crew are mutually reinforcing components of a healthy bioactive enclosure.
Placement strategy: Mount epiphytes and train vines along perch structures. Group plants with similar light and humidity needs. Avoid overcrowding basking areas or blocking access to primary perch positions. Consider how plant density at different heights affects the UVI gradient from your UVB source.